Art Jewelry forums are FREE. If you wish to participate you must LOGIN | REGISTER.

Polishing/finishing

Tarnish Removal
Last post 08-24-2007 11:47 AM by kjscrim. 4 replies.
Sort Posts:
Page 1 of 1 (5 items)
  • 08-20-2007 9:54 AM

    Tarnish Removal

    Somewhere along in the past four years I read a post either here, or on another site, that there is a way to remove tarnish from silver beads using a homemade remedy.   I remember that there was aluminum foil at the bottom, but I just can't remember the rest.

    I have stardust sterling beads that are very pretty (they have flecks of silver on the surface), but they tarnish and it is impossible to use a tarnish cloth on them.  It would be great to be able to use a liquid of some kind, but I don't want to do damage to the surface.  The bracelets are in a store displayed in open air so the usual prevention methods are not an option.

    Does anyone know what I'm talking about??

    Thanks for your help!  ~Kathie

     

    Signature
    Independent Consultant - Arbonne International
    Work at Home - Ask me how
    www.MyCorner.myarbonne.com
  • 08-20-2007 11:29 AM In reply to

    Re: Tarnish Removal

    Hey Kathie,
    Maybe try the old Baking soda, water and aliminum foil trick. Line a pyrex pan with aluminum foil. Make a soultion of 4 cups of pretty warm water (almost hot) and a couple table spoons of baking soda. Put it in the foil lined pan. Then put your tarnished silver in it. And presto it should start to remove the tarnish right away. It works best when the silver is touching the aluminum. Take it out of the solution as soon as its done.


    Aaron
  • 08-20-2007 11:41 AM In reply to

    Re: Tarnish Removal

    It's the aluminum foil method, one thing this recipe doesn't point out; do not use a metal pan, use glass. Also only use silver cleaning methods with silver, if you have a stone setting do not use the aluminum foil method or a steam/ ultrasonic/ vibratory type cleaning method. A professional jeweler is the only person who will know the stability/ durability of the stone or setting and what type of cleaning method can be used safely.

    Sterling silver is an alloy of 92 1/2 percent silver and 7 1/2 percent copper. Its beauty increases with use, which causes a patina or soft sheen to form. Plated silver is silver that has been electroplated over another metal. Silver tarnishes when exposed to air. This occurs more quickly in damp and foggy weather, but is inevitable in any climate. Store in treated paper or cloth, or plastic film.

    Methods of cleaning silver should be determined by the value placed on it, monetary or sentimental, and the design of the pattern. Silver with deeply "carved" patterns that are enhanced by an oxide or French gray finish should be hand polished with a high quality silver cream or polish.

    Hand rubbing develops patina on silver which adds to its beauty. Ornamental silver pieces that have been lacquered may be washed in lukewarm water; hot water could remove the lacquer. Polishing silver while wearing rubber gloves promotes tarnish. Instead, choose plastic or cotton gloves.

    Silver has enemies. Rubber severely affects silver. Rubber corrodes silver, and it can become so deeply etched that only a silversmith can repair the damage. Raised designs can be lost permanently. Avoid using storage cabinets or chests with rubber seals, rubber floor coverings, rubber bands, etc.

    Other enemies of silver include table salt, olives, salad dressing, eggs, vinegar and fruit juices. Serve these foods in china or glass containers. Although flowers and fruit look lovely in silver containers, the acid produced as they decay can etch the containers and cause serious damage. When using silver containers, use plastic or glass liners.

    Baking Soda: Apply a paste of baking soda and water. Rub, rinse, and polish dry with a soft cloth. To remove tarnish from silverware, sprinkle baking soda on a damp cloth and rub it on the silverware until tarnish is gone. Rinse and dry well.

    Aluminum Foil, Baking Soda, and Salt: Place a sheet of aluminum foil in the bottom of a pan, add 2-3 inches of water, 1 teaspoon baking soda, 1 teaspoon salt, and bring to a boil. Add silver pieces, boil 2-3 minutes, making sure the water covers the silver pieces. Remove silver, rinse, dry, and buff with a soft cloth. This method cleans the design and crevices of silver pieces.

    Toothpaste: To clean off tarnish, coat the silver with toothpaste, then run it under warm water, work it into a foam, and rinse it off. For stubborn stains or intricate grooves, use an old soft-bristled toothbrush.

    Signature
    We teach best what we most need to learn-- from Illusions by Richard Bach
  • 08-20-2007 6:02 PM In reply to

    Re: Tarnish Removal

    Yup!  This is what I was looking for!

    Thanks a bunch!    ~Kathie

    Signature
    Independent Consultant - Arbonne International
    Work at Home - Ask me how
    www.MyCorner.myarbonne.com
  • 08-24-2007 11:47 AM In reply to

    Re: Tarnish Removal

    I just tried this formula and it worked quite well.

    I do have another question....  If something is really badly tarnished can it ever be fully cleaned?  I am referring to the "stardust" beads that I mentioned above.  For the most part they cleaned up very well, but a few of them just won't clean up.  I tried the home-made method above.  On the pieces that it didn't work I tried liquid tarnish remover.  The tarnish is still wedged between the beads. 

    Do I need to just bag it and re-do the piece and start over with new beads?  Any suggestions?

    ~Kathie 

    Signature
    Independent Consultant - Arbonne International
    Work at Home - Ask me how
    www.MyCorner.myarbonne.com
Page 1 of 1 (5 items)

Become a Member

Register online for access to more valuable resource information.
Don't miss your connection to the reader forum, free projects, how to videos, and more.

Not a Member?
Register  |  Why Join?

Secure Login Subscriber & Member Log In
E-mail Address:
Password:
Remember me

My Profile

Search Community

in
Copyright © 2009 Kalmbach Publishing Co.
Powered by Community Server (Commercial Edition), by Telligent Systems